Misplaced Pages

Chesapeake and Ohio classes L-2 and L-2-A

Article snapshot taken from[REDACTED] with creative commons attribution-sharealike license. Give it a read and then ask your questions in the chat. We can research this topic together.
(Redirected from Chesapeake and Ohio Class L-2 and L-2a) American steam locomotive class
This article needs additional citations for verification. Please help improve this article by adding citations to reliable sources. Unsourced material may be challenged and removed.
Find sources: "Chesapeake and Ohio classes L-2 and L-2-A" – news · newspapers · books · scholar · JSTOR (March 2022) (Learn how and when to remove this message)
C&O L-2
Type and origin
Power typeSteam
BuilderBaldwin Locomotive Works
Build date1941
Total produced8
Specifications
Configuration:
 • Whyte4-6-4
 • UIC2′C2′ h2
Gauge4 ft 8+1⁄2 in (1,435 mm) standard gauge
Driver dia.78 in (1.981 m)
Length108 ft 0 in (32.92 m)
Adhesive weight217,500 lb (98,700 kg; 98.7 t)
Loco weight439,500 lb (199,400 kg; 199.4 t)
Total weight832,500 lb (377,600 kg; 377.6 t)
Fuel typeCoal
Fuel capacity60,000 lb (27,000 kg; 27 t)
Water cap.21,000 US gallons (79,000 L; 17,000 imp gal)
Firebox:
 • Grate area90 sq ft (8.4 m)
Boiler pressure255 psi (1.76 MPa)
Heating surface4,233 sq ft (393.3 m)
Superheater:
 • Heating area1,810 sq ft (168.2 m)
CylindersTwo
Cylinder size25 in × 30 in (635 mm × 762 mm)
Career
OperatorsChesapeake and Ohio Railway
Numbers300–307
Retired1953
DispositionAll scrapped
C&O L-2-A
Type and origin
Only differences from L-2 above are shown
Power typeSteam
BuilderBaldwin Locomotive Works
Build date1948
Total produced5
Specifications
Driver dia.78 in (1.981 m)
Length108 ft 0 in (32.92 m)
Adhesive weight219,500 lb (99,600 kg; 99.6 t)
Loco weight443,000 lb (201,000 kg; 201 t)
Total weight836,000 lb (379,000 kg; 379 t)
Career
OperatorsChesapeake & Ohio Railway
Numbers310–314
Retired1955-1958
Scrapped1959

The Chesapeake and Ohio Railway's class L-2 comprised eight coal-fired 4-6-4 "Hudson" type steam locomotives numbered 300–307 and built by the Baldwin Locomotive Works of Philadelphia, Pennsylvania in 1941. They had roller bearings on all axles, and the first-built, No. 300, also had roller bearings on its side and main rods. No. 300 bore "Elephant ear" smoke deflectors from 1948.

In 1947, the C&O ordered five additional and very similar locomotives, numbering them 310–314; these were class L-2-A and differed mostly in using Franklin RC poppet valves instead of the Baker valve gear of the L-2s. These were the last express passenger steam locomotives ordered by a United States railroad, and some of the most expensive at $353,346 each, 80% more than the cost of the 8 earlier L-2 locomotives.

Both classes were among the largest 4-6-4s ever built, and they were even more powerful than the C&O's L-1 class. The heaviest were the C&O's L2a class at 443,000 lbs, They were intended to work the C&O's top-flight express trains on level ground; the railroad purchased 4-8-4 "Greenbrier" types for mountain service.

By 1953, C&O passenger services were wholly dieselized, and there was no more work for these locomotives to do. Hudson locomotives were very unsuited to freight work, with such a comparatively small proportion of their weight on the drivers. All the L2’s and L2a’s were quickly scrapped by 1953.

References

  1. Keefe, Kevin (Fall 2023). "Heaviest Hudson: Chesapeake & Ohio's L2a". Classic Trains. No. 3 Vol 24. Kalmbach Media. p. 9.

Notes

  1. Huddleston, Eugene L. (Jan–Feb 2002). "The outstanding features and many lives of C&O 614". Chesapeake and Ohio Historical Magazine. Archived from the original on 2006-06-21. Retrieved 2006-01-11.
Categories:
Chesapeake and Ohio classes L-2 and L-2-A Add topic